10# Drop Weight (1.5inch) Diameter

This pours a drop weight (a few thousandths of an inch over) 1-1/2 inches in diameter that weighs approximately 10 lbs.  

If you would like to be able to pour these in sizes ranging from about one (1) lb to about ten (10) pounds add the (9) optional 1lb displacement spacers.  Inserts are apx 1.5 inches in diameter and just slightly shorter than 1.375 inches long.  You can buy ours or source your own.  If you source your own do not forget to put a generous chamfer on one end of the first one to set in the bottom of the mold.   

The mold is setup to use a standard "downrigger" eyelet and use a clamping screw to easily hold the eyelet exactly where you want it in the mold.  The mold is hinged to make use easier, and includes handles to make it easy to open the mold to remove your casting.  

Insert Options:  

• None: You can select to purchase this mold without inserts and source your own, or just pour ten pound drop weights.  
• Aluminum:  Aluminum inserts are offered as an economical alternative, but I do not recommend them.  They can be dinged up and damaged more easily than stainless inserts.
• Stainless:  While nothing is proof against abuse and rough handling the stainless inserts are the least likely to suffer dents and dings from normal handling.  

I've received some incredulous reactions to the price of this mold.  It seems expensive to me too, but metal is expensive, and it takes time to remove that much metal to create the cavity.  I also know that one of the most seen alternatives on one of the big sales platforms is quite a lot MORE expensive than this one.  Sorry.  Its priced what it is due to the cost to make it.